The drive towards supplying power, light and heat from renewable sources is inevitable. Government driven measures to reduce CO2 emissions from fossil fuels support technologies that are developing at an ever-increasing pace.
Our Parker Energy division offers design and installation expertise for clients in the domestic environment to large scale industrial, commercial and retail operations. Solutions include:-
“a proactive approach to the future gives us an enhanced offering today and ensures a sustainable future.”
Electrical Design Manager
- Solar Panels (Photovoltaic – PV)
- Solar Thermal systems
- Electric Vehicle (EV) charging points
- Air and Ground source heat pumps
- Led & Lighting solutions
- Voltage Optimisation
- Variable speed drives
- Biomass Boilers
- Energy Measurement
We recognise the importance of a full structural survey where panels are to be installed on roofs. For this reason, we partner with a fully accredited roofing contractor which gives our clients peace of mind and the guarantee of a job professionally carried out. The electrical installation is carried out by our own highly trained employees. Clients also have the reassurance that we are accredited under the Micro-Generation Certification Scheme which facilitates settlement of the “FIT” (Feed In Tariff) at the appropriate level for a 25 year period.
In this area particularly, clients range from owners of a residential property to multi-megawatt solar farms.
EV charging points
Increasing numbers of automotive manufacturers are now bringing electric vehicles to market, and to service this growing demand, both local authorities and commercial organisations are actively pursuing a strategy of installing charging points. Our electrical expertise enables us to design and install these points for a range of clients from a single domestic property upwards.
Air Source Heat Pumps
An air source heat pump is usually placed outside at the side or back of a property, and takes heat from the air and boosts it to a higher temperature using a heat pump. This heat is then used to heat radiators, underfloor heating or even warm air convectors and hot water in your home.
The pump needs electricity to run, but the idea is that it uses less electrical energy than the heat it produces.
Ground source heat pumps are also available. They draw heat from the ground via a network of water pipes buried underground, usually in your garden.
Voltage Optimisation is a well established and proven technology in the UK where electricity is supplied at an average of 242 volts, which is high, compared to other countries. Electrical equipment manufacturers produce products which can be used all over the world, products across Europe are designed to work across a wide voltage range 207v to 253 volts. Domestic and Commercial properties will benefit from the reduction in Voltage with many appliances operating efficiently at 220v. When your voltage exceeds this level energy is wasted in both heat and vibration, which reduces the life span and increases your costs.
REDUCES YOUR ELECTRICITY CONSUMPTION BY UP TO 19%
ADJUSTABLE SAVING SETTINGS
WORKS 24 HOURS A DAY
REDUCES YOUR CARBON FOOTPRINT
INCREASES THE LIFE OF THE PRODUCTS
Domestic Properties, Hotels, Universities,Pubs, Petrol stations,Car Parks,Petrol Statiions, Fitness Centers,Swimming Pools Nursing Homes,Schools,Industrial Units,Factories & Colleges etc
Technology in lighting is changing the way that lighting systems are installed both new and retrofit , the opportunity to reduce the amount of power used through inefficient lighting systems has never been greater with the development of T5 and LED add to this occupancy sensors and daylight saving which ensures the lighting ramps up and down as required saving up to 70% of energy usage. Offices , Car Parks , Factories, Schools , Hospitals will all benefit from lighting surveys using the latest Technologies from the leading manufacturers , Thorn,Thorlux,Whitecroft, JCC, Dextra, Wirefield, GE,Osram etc.
Variable Speed Drives
Adjustable Speed drives (ASD) or Variable-Speed Drives (VSD) are used to control the speed of motors. Many fans and pumps over 5 years old are constant speed, by adding thermal or flow controls you can reduce the speed of the motors in line with demand this saving energy.
Many Ventilation systems are balanced by the use of Dampers and yet the fans are left to run flat out with the only control being a timer, Occupation or Co2 sensors can be used, connected direct to the fans thus reducing the speed and energy used in line with demand.
Heating pumps running all day with the only form of control being a by-pass on the system, install thermostats controlling the speed of the pumps through a VSD , saving energy!!!!
Free survey and payback calculations are available.
By using the power of the Sun , Solar Energy which is Free and clean is harnessed by using solar collectors , flat plate or Evacuated tube (Vacuum ), located on the roof, and used to transfer heat to a hot water cylinder providing free hot water alongside conventional water heating systems.
The Hot water system is supplemented by a secondary supply , immersion heater or boilers.
The systems can be mounted “in Roof” “On roof” or “framed” , maintenance costs being very low, with most systems having a five or ten year warranty, although periodic checks need to be carried out. Typical savings on your energy bills are between £70 and £80 a year although savings will vary from user to user, Carbon savings of around 250 to 350 KgCO2/year.
Ideal for commercial installations in Office blocks and factories where Hot water is used on a regular basis and the technology is an agreed measure under the Green Deal , being eligible for financing.
Domestic Solar Thermal, provided it is installed by an MCS installer, is subject to a payment of £600 under the RHPP ( Renewable Heat Premium Payment) ) and is expected that in April 2014 Solar Thermal will come under the RHI payments scheme with payments based on the amount of heat produced, ( KWH). For non – domestic applications Solar thermal using the same technologies up to 200 Kwth the RHI is dependent on the size of the system.
Call now for a free survey.
Energy Measurement & Monitoring
Have you ever wondered where your Energy is being used, why not let us fit an energy monitoring system.
The system is easily installed and using real time can be displayed through a web portal, this allows you to monitor individual circuits, something many BMS systems cannot do, using the internet connectivity with access from Home, Work, Mobile or PC you can monitor your point of energy use.
Alert e-mails or text messages can be sent making you aware of any abnormal use and with the knowledge of the use you can take corrective action covering everything from behaviour to changing lighting, variable speed drives, time clocks etc etc by having the knowledge you can make the correct decisions.
All you need is an existing broadband connection, a PC or smartphone, we will do the rest, through local CTs and a transmitter we will set up a system to measure as many circuits as you like!!!
See details enclosed and e-mail email@example.com for further information.
By its own description Biomass- is the use of an organic material in our case the majority is wood in various stages. The use of wood as a modern source of energy , locally sourced, carbon-neutral and renewable, wood offers an excellent price performance ratio.
Two kilograms of pellets will generate approximately the same heat as 1ltre of heating oil.
Biomass Heating comes under the Government RHI scheme , Commercial RHI Tariff for <200kW Biomass Boiler
8.3p/kWhr for first 1,314 at Full Power =2.1p/kWhr thereafter.
Pellets are the most compact form of wood energy and require the smallest storage capacity. High calorific value.
Untreated sawdust from sawmills, joineries and wood-processing facilities.
Unprocessed mixture of woodchips and sawdust .Maximum size: G50.
Shredded, untreated wood, with or withoutbark. Large storage capacity required.
Maximum size: G50.
Low CO2 emmissions with excellent combustion efficiency, partnering with the Woodland Trust. We can provide individual boilers from Domestic to large Commercial, also pre-mounted Skid built units for ease of installation cutting the downtime of the changeover.
We can provide a complete solution whatever your requirement , please contact the team for a quotation and pay back.
Ground Source Heat Pumps
A ground source heat pump uses pipes buried in the ground to extract heat , these pipes can be buried horizontal or vertical (Bore Holes) , this heat can then be used to heat radiators , Underfloor heating or warm air heating systems as well as hot water.
The pipework in the ground is the “ground Loop” which stays constant throughout the year, and using which is then passed through a compressor which raises the temperature and can then be used to heat the water for heating and hot water, the fluid then goes passes back into the ground where it is absorbed back into the ground. Heat pumps have some impact on the environment as they need electricity to run, but the heat they extract from the ground, the air, or water is constantly being renewed naturally.
In a new development for each Kilowatt of electricity used to run the heat pump three to four Kilowatts of heat can be generated, providing the quality of the design and installation are to the latest standard.
Ground source heat pump systems installed after July 2009 in commercial properties can apply to Ofgem to be paid around 10pence/KWH for 20 years.